What Is the LiberNovo Omni Pro?
The LiberNovo Omni Pro is a dynamic ergonomic chair — the manufacturer’s full name for it is the LiberNovo Omni Pro Dynamic Ergonomic Chair. It comes in two colours, Graphite and Glacier, with a choice of two seat depths, 45 cm or 48 cm. What separates it from an ordinary office chair is that several of its parts are motorised or designed to move together: a ventilated seat, a lumbar mechanism that stretches under power, and a backrest built from flexible panels rather than one rigid shell.
That framing matters for how you read the rest of this post. Everything below comes from the manufacturer’s own product page, describing what LiberNovo says about the chair, how the parts are meant to work and what the test claims are. We have not sat in this chair, so nothing here is a hands-on verdict — and where buyers have reported problems, those are included too.
The Five Recline Positions
The image shows the chair in use at a desk, with a footrest under the user’s feet and the recline angles laid over the picture. According to LiberNovo the chair locks into five positions rather than one: 105°, 115°, 125°, 135° and 160°, named Deep Focus, Balance, Solo-Work, Soft Recline and Spine Flow. The idea is that you move between those settings through the day instead of sitting in one fixed angle — the upright end for desk work, the deeper ones when you want to lean back — and the footrest visible in the picture is the accessory that pairs with the reclined positions.
The Seat Ventilation Fan
This cutaway shows what sits under the seat cushion: layers of fabric, padding, mesh and perforated foam above a base that holds a centrifugal fan, with the airflow drawn out to the sides. LiberNovo calls this active airflow seat ventilation and lists the fan at 4000 RPM with two speed settings. There is also a seat sensor that pauses the airflow when you get up and starts it again when you sit back down, so the fan is not running against an empty chair.
The battery behind it is a 3000mAh built-in pack, and the manufacturer’s FAQ gives two runtime figures with the ventilation running: up to 36 hours on the low setting, and up to 9 hours on the high setting. Those numbers are fan runtimes, not a comfort claim — the video card further down this page leads with the 36-hour figure, and that is what the figure refers to.
The Backrest and Dynamic Support
The collage shows the chair in the places people actually use it: a desk setup, a workstation with a monitor or two, a gaming corner with the lights down, and someone reclined with a book. What the manufacturer is pointing at here is the backrest. LiberNovo describes the Bionic FlexFit backrest as eight flexible panels with sixteen pivot points that move with the spine, rather than a single rigid shell. It also describes dynamic support, where the headrest, backrest and armrests move in sync through what it calls differential tilt — so the parts follow one another as you recline instead of each moving on its own.
The Adjustments, Panel by Panel
The last image is a diagram rather than a photograph: four panels covering the armrest, the recline and tension control, the headrest and the seat height, each with arrows showing which way the part moves. It works as a summary of what is adjustable — the armrests move in several directions, the recline and its tension are set separately, the headrest detaches, and the seat height is on a lever under the seat. LiberNovo describes the neck support as memory foam and the backrest foam as high-density and resilient, with a multi-density cushion on the seat.
Motorised Lumbar Support and OmniStretch
Alongside the flexing backrest, the Omni Pro has motorised lumbar support and a motorised lumbar stretch that LiberNovo markets as OmniStretch. Both are operated by buttons on the armrest rather than by a lever under the seat, and that is the part that makes them different from a manual lumbar dial: you can change the amount of support, or run the stretch, without leaving the position you are sitting in. The manufacturer designs the chair for comfort and support through long sessions and makes no medical claim about it, so treat the stretch as a powered adjustment you can reach from the chair rather than as a treatment for anything.
Materials and Durability Claims
The upholstery is Gabriel Atlantic fabric, a Danish textile that LiberNovo cites with a rub-test rating above 100,000 cycles. The base is reinforced aluminium alloy, and the chair runs on casters. On durability, the manufacturer publishes BIFMA-based cycle claims for individual parts: 300,000 cycles for the recline mechanism, 120,000 for the backrest, 120,000 for the seat swivel, 100,000 for seating impact, 100,000 for the base and casters, and 60,000 for the armrests. Those are the manufacturer’s test-cycle figures, not measurements we made.
Who the Omni Pro Fits
LiberNovo recommends the chair for heights from 5'0" to 6'1" (153 to 186 cm), with a stated weight limit of up to 300 lbs — 136 kg under BIFMA, 110 kg under EN1335. The two seat depths are the other half of the fit decision, and the usual logic applies: the deeper option suits longer thighs, the shallower one suits shorter legs. If you fall outside the recommended height range, or you are unsure which depth suits you, that is worth settling before you order.
The wider checklist: what to look for in any ergonomic chair →
What Some Buyers Report
Reviews on the manufacturer’s page are not all glowing, and the recurring complaints are worth knowing about. One buyer reported a problem with the lumbar support and a delayed replacement part. Another said the armrests pivot too easily, that the armrest tops are not replaceable, and that the footrest felt cheaper than the chair itself. Individual reports are not a pattern we can verify — we have not used the chair — but on a premium-priced product they are the kind of detail worth weighing before you commit.
Price, Warranty and Where to Buy
The Omni Pro is a premium-priced chair, and we are not quoting a figure here because prices move and the manufacturer’s store and Amazon are separate purchase paths. On LiberNovo’s own store the warranty runs six years on the frame and two years on the electronics, with a 30-day trial; those terms are for that store, and Amazon’s returns and warranty handling may differ, so check the Amazon listing for what applies to you. The manufacturer’s store also sells the chair in bundles — chair only, chair with footrest, and chair with footrest and an extra battery — and we cannot say which of those a given listing corresponds to.
As an Amazon Associate, I earn from qualifying purchases.
Is the LiberNovo Omni Pro Worth It?
If what you want is a chair that moves with you — a backrest that flexes instead of holding one shape, powered lumbar support you can adjust from the armrest, five locked recline positions and a seat that keeps air moving underneath you — this chair is built around exactly those ideas, and the manufacturer documents the parts in more detail than most. Seat ventilation is the feature that is hardest to find elsewhere, and the 36-hour low-speed runtime means it can run for several working days between charges. Against that: it is a premium purchase, some buyers have reported problems with the lumbar support and the armrests, and the warranty and trial terms quoted here come from the manufacturer’s own store rather than Amazon. If you want a straightforward chair and would never use a fan or a powered stretch, the features you would be paying for are the ones you would leave switched off.
Frequently Asked Questions
It is the LiberNovo Omni Pro Dynamic Ergonomic Chair, a chair with seat ventilation, powered lumbar support and stretch, five recline positions and a flexible panel backrest. It comes in Graphite and Glacier with 45 cm or 48 cm seat depth.
